Custom Three Stone Opal and Diamond Engagement Ring
Item # 103398
Center stone sold separately.
Questions? Talk with a Joseph Jewelry designer
Matching items
Description
This gorgeous engagement ring features a princess cut diamond in the center, flanked on either side by a smaller princess cut stone to complete the three stone setting, and accented by bright cut set diamond accents on the criss-cross shank below. It was created for a client from Plymouth, MI, and we made a matching wedding band for him at the same time. Design Your Own Engagement Ring
Read the full description
Three-stone Setting
All three of the princess cut diamonds in the main setting of this ring were provided by the client. He asked us to take them out of an existing ring and design a new setting around them based on his other stated feature and style preferences. This allowed us to ensure the ring was perfectly proportioned to show off the stunning beauty of all three stones, and the way they’re arranged in relation to each other creates a truly dramatic presentation. Three Stone Engagement Rings
The largest of the three diamonds is 0.75 carats, and it sits up above the side stones in a four-prong setting that arises smoothly from the very center of the top of the ring. The side stones are tucked slightly under this larger diamond, and they’re angled out a bit to help them flow seamlessly into the band design below.
Diamond and Opal Accents
Both strands of the split criss-cross shank are lined with round bright cut set diamonds down to just past the mid-point on the band. This is also the spot where the two strands come back together, and they continue as a single, smooth piece down to the bottom. Cabochon cut opals are set on each ring front, with their bezel setting directly over the origin point for the prongs holding the center princess cut diamond. Matching Wedding Sets
Custom Wedding Sets
Particularly if you’re interested in this type of engagement ring design, it can be a good idea to have both rings in your wedding set made at the same time. That’s because a tracer band like the one we made to go with this piece must line up perfectly with the engagement ring, requiring that we have that engagement ring to use as a guide throughout the production process.
Of course, we can still make a matching wedding band for you even if you already have an existing engagement, but we may need to borrow the engagement ring during the production process. This will allow us to line up both pieces perfectly, and it will also ensure we can match all details and features precisely.
Reference specifications
- Item number
- 103398
- US ring size shown
- 5.00
- Details
- 14k White Gold Ring
2 Opals - 1.5 mm
2 Princess Cut Diamonds - 2.45 mm or .24 ctw
58 Diamonds - .21 ctw
Clarity: VS2 - Color: F-G
Joseph Jewelry - Cut
- Princess Cut
- Gem
- Diamond
- Style
- Split Shank, Unique
- Setting style
- Bezel, Bright Cut
- Band style
- Criss-Cross
- Metal shown
- White Gold
- Finish
- Polished
These specifications describe the original design. Stone counts and weights are approximate and may change with size or customization.
Customize
Use this design as a starting point for a custom piece.
Discuss the stones, metal, proportions, setting and finish with a designer, online or in our Seattle and Bellevue showrooms. You can bring reference photographs or your own stone for us to assess.
Design and estimate
The initial design and estimate are free, with no obligation. Your designer discusses the materials, changes and budget with you before you commit.
3D design review
After you accept the estimate and make a down payment, we create a 3D CAD model and rendered views. Revisions within the initial design parameters are included; changes to materials or their amounts are re-estimated.
Physical model
A full-size wax model can be made to review scale, shape and proportions before production. It can be viewed in a showroom or shipped to you.
Approval and production
The design is approved before production begins. Your designer confirms the schedule, and our jewelers make, set and finish the piece.
Quality
Our custom jewelry follows design and construction standards for metal thickness, weight, stone support and setting security.
- Structure and support
- The setting must have enough metal to support the stones and hold its shape through everyday wear. If an area needs more support, we address it before production.
- Diamond and gemstone selection
- We help you choose stones for your custom design, reviewing cut, color, clarity, consistency and fit. Your budget guides these choices; our standards for materials and craftsmanship remain the same.
- Final inspection
- Before completion, we review each custom piece for proportion, comfort, stone security and finish.
Lifetime warranty and care
- Lifetime warrantyYour custom piece is covered against manufacturing defects.
- Inspection every six monthsOur jewelers inspect your piece and provide ongoing care for the custom jewelry we make for you.
- Complimentary cleaningVisit us every six months for a complimentary cleaning.
Coverage conditions
For Joseph Jewelry custom pieces, coverage begins with your signature. To keep it active, Joseph Jewelry must inspect and sign for your piece every six months and perform recommended repairs and maintenance.
Repairs due to normal wear and tear are the owner's responsibility. Damage, abuse or alterations can void coverage. Customers outside Washington pay shipping both ways for inspections or repairs, plus applicable duty or customs fees.