Custom Tanzanite and Diamond Engagement Ring
Item # 103340
Center stone sold separately.
Questions? Talk with a Joseph Jewelry designer
Description
This stunning engagement ring features a round tanzanite claw prong set at the top of a tapered palladium shank, accented with diamonds, milgrain, and custom hand engraving. It was created for a client from Eagle Pass, TX, who used the Ring Builder tool on our website to begin the custom design process.
Read the full description
He had a good idea about some of the features he wanted to include in his ring, and he asked for advice in some other areas as well. Based on his selections, we developed concept sketches and then CAD models of the piece we proposed to make, and after requesting a few minor modifications, he approved the design to move into production. Design Your Own Engagement Ring
Tanzanite Center
At the top of this ring sits a 1.55 carat round tanzanite, whose rich blue color contrasts beautifully with the silvery palladium it’s set in. The main setting consists of four talon prongs, and the points of these curl up over the edge of the tanzanite, holding the stone securely while introducing a bit of classical flair.
Diamond Accents
Small round diamonds are bright cut set down the shank shoulders, beginning right up at the side of the main setting and continuing down to the mid-point on the band. These taper slightly as they move away from the top, following the contours of the band so that they fill the space available perfectly. One of a Kind Engagement Rings
Hand Engraving, Milgrain and Filigree
An elegant wheat pattern is custom hand-engraved on the fronts of the shank, and it picks up where the diamonds stop on the top of the shank as well. Only a small space at the very bottom of the ring is left blank to allow for sizing later on, and both the diamonds and the engraving are framed by delicate lines of milgrain beading.
Whimsical curls of filigree fill the space below the shank shoulders on either side of the main setting, providing a delightful hidden detail and putting the finishing touch on this gorgeous design. The filigree was an element that the client wanted to make sure was included, and so we adjusted the main setting style from our original design slightly to maximize the available space for this.
Reference specifications
- Item number
- 103340
- US ring size shown
- 5.50
- Details
- Palladium Ring
16 Diamonds - .27 ctw
Clarity: VS2 - Color: F-G
Joseph Jewelry - Center pictured
- 1.55 ct Tanzanite
- Setting style
- Claw Prong
These specifications describe the original design. Stone counts and weights are approximate and may change with size or customization.
Customize
Use this design as a starting point for a custom piece.
Discuss the stones, metal, proportions, setting and finish with a designer, online or in our Seattle and Bellevue showrooms. You can bring reference photographs or your own stone for us to assess.
Design and estimate
The initial design and estimate are free, with no obligation. Your designer discusses the materials, changes and budget with you before you commit.
3D design review
After you accept the estimate and make a down payment, we create a 3D CAD model and rendered views. Revisions within the initial design parameters are included; changes to materials or their amounts are re-estimated.
Physical model
A full-size wax model can be made to review scale, shape and proportions before production. It can be viewed in a showroom or shipped to you.
Approval and production
The design is approved before production begins. Your designer confirms the schedule, and our jewelers make, set and finish the piece.
Quality
Our custom jewelry follows design and construction standards for metal thickness, weight, stone support and setting security.
- Structure and support
- The setting must have enough metal to support the stones and hold its shape through everyday wear. If an area needs more support, we address it before production.
- Diamond and gemstone selection
- We help you choose stones for your custom design, reviewing cut, color, clarity, consistency and fit. Your budget guides these choices; our standards for materials and craftsmanship remain the same.
- Final inspection
- Before completion, we review each custom piece for proportion, comfort, stone security and finish.
Lifetime warranty and care
- Lifetime warrantyYour custom piece is covered against manufacturing defects.
- Inspection every six monthsOur jewelers inspect your piece and provide ongoing care for the custom jewelry we make for you.
- Complimentary cleaningVisit us every six months for a complimentary cleaning.
Coverage conditions
For Joseph Jewelry custom pieces, coverage begins with your signature. To keep it active, Joseph Jewelry must inspect and sign for your piece every six months and perform recommended repairs and maintenance.
Repairs due to normal wear and tear are the owner's responsibility. Damage, abuse or alterations can void coverage. Customers outside Washington pay shipping both ways for inspections or repairs, plus applicable duty or customs fees.