Custom Men's Brushed Two-Tone White Gold Band
Item # 101171
Questions? Talk with a Joseph Jewelry designer
Description
This stunning men’s wedding ring features a two-tone look created by leaving the center band of white gold unplated. The ring itself is squared, and a single round diamond is gypsy set in the middle section. It was created for a client from Plymouth, PA, who found some rings on our site that she liked and chose one to customize for her fiance. Design Your Own Wedding Ring
Read the full description
Two-tone Band
This piece is divided into three parts, with the center section made of unplated 14k white gold, and the sides plated. That combination creates a lovely contrast between the sliver of the outside and the champagne color on the inside. The sections are separated definitively by deep, stylized grooves that are silver like the outer bands but share the same brushed finish as the raised portions of the piece.
Groove Design
The grooves that divide the bands of the ring are asymmetrical, with a straight edge on the inside where they border the unplated section, and almost a curved edge on the outside. The curves come to a point at the corners of the squared band, which is the widest point of the grooves. This arrangement complements the squared shape of the band nicely, and it adds an extra layer of complexity to the design as well.
Diamond Accent
There is a single round diamond gypsy set off to the side on the top of the ring. The type of setting used allows it to sit flush with the band, and it contrasts nicely with the unplated white gold so that the diamond is clearly visible without dominating the design.
Working a gemstone into a men’s ring like this is a good way to create a link with the women’s bands that make up the rest of the wedding set. And even if you don’t want the gemstone on the outside, you can still include one flush set on the inside of the band as a special detail only you and your partner know about.
Reference specifications
- Item number
- 101171
- US ring size shown
- 9.75
- Details
- 14k White Gold Ring
10 mm wide
Comfort Fit
1 Diamond
Clarity: VS2 - Color: F-G
Joseph Jewelry - Style
- Luxury
- Setting style
- Flush Set
- Band style
- Square Band
- Feature
- Diamonds
- Metal shown
- Two-Tone
- Finish
- Brushed
These specifications describe the original design. Stone counts and weights are approximate and may change with size or customization.
Customize
Use this design as a starting point for a custom piece.
Discuss the stones, metal, proportions, setting and finish with a designer, online or in our Seattle and Bellevue showrooms. You can bring reference photographs or your own stone for us to assess.
Design and estimate
The initial design and estimate are free, with no obligation. Your designer discusses the materials, changes and budget with you before you commit.
3D design review
After you accept the estimate and make a down payment, we create a 3D CAD model and rendered views. Revisions within the initial design parameters are included; changes to materials or their amounts are re-estimated.
Physical model
A full-size wax model can be made to review scale, shape and proportions before production. It can be viewed in a showroom or shipped to you.
Approval and production
The design is approved before production begins. Your designer confirms the schedule, and our jewelers make, set and finish the piece.
Quality
Our custom jewelry follows design and construction standards for metal thickness, weight, stone support and setting security.
- Structure and support
- The setting must have enough metal to support the stones and hold its shape through everyday wear. If an area needs more support, we address it before production.
- Diamond and gemstone selection
- We help you choose stones for your custom design, reviewing cut, color, clarity, consistency and fit. Your budget guides these choices; our standards for materials and craftsmanship remain the same.
- Final inspection
- Before completion, we review each custom piece for proportion, comfort, stone security and finish.
Lifetime warranty and care
- Lifetime warrantyYour custom piece is covered against manufacturing defects.
- Inspection every six monthsOur jewelers inspect your piece and provide ongoing care for the custom jewelry we make for you.
- Complimentary cleaningVisit us every six months for a complimentary cleaning.
Coverage conditions
For Joseph Jewelry custom pieces, coverage begins with your signature. To keep it active, Joseph Jewelry must inspect and sign for your piece every six months and perform recommended repairs and maintenance.
Repairs due to normal wear and tear are the owner's responsibility. Damage, abuse or alterations can void coverage. Customers outside Washington pay shipping both ways for inspections or repairs, plus applicable duty or customs fees.