Custom Two-Tone Diamond Men's Band
Item # 102871
Questions? Talk with a Joseph Jewelry designer
Description
This stylish men’s ring features two round diamonds flush set off to the side in a two-tone band, with a custom filigree plate on the interior. It was created for a couple from Issaquah, WA who wanted to have his wedding ring remade to mark a special milestone in their relationship.
Read the full description
We shared CAD images of their piece with them through the online workroom we set up for the project, and they then came in to inspect wax models of the design. We repeated this process a few times until they were sure the outline was just right, and at that point, we turned their project over to our expert artisans to begin production. Design Your Own Wedding Ring
Two-tone Band
The center portion of this ring is made from 14k yellow gold, and it’s bordered by narrow white gold rails all the way around. This gives the ring a nice two-tone look, introducing some contrast without overshadowing the rest of the design.
The band itself is squared but with rounded corners, and it’s flatter on the top than on the bottom. The center portion sits slightly above the rails, but there is no space between the two sections. This was one of the changes the client requested from an earlier version of the piece, as he was concerned that dirt would collect in the small crevices between the yellow and white gold.
Diamond Accents
Two round diamonds are flush set in a line across the yellow gold section of the band, and shallow grooves frame them on either side. These highlight the contrast between the two metals, and they add some sparkle to the ring as well. Our initial models had these diamonds quite a bit smaller, but after seeing the first wax model, the clients asked that we increase their size to improve the overall balance of the piece.
Filigree Plate
On the inside of the ring, a custom filigree plate runs underneath the top of the band. This features a Celtic-inspired pattern, and a Celtic cross sits right in the center. Because this is a detail that will only be seen when the ring isn’t being worn, it was a nice way for the clients to include something of personal significance that only they know about. Celtic Rings
Reference specifications
- Item number
- 102871
- US ring size shown
- 9.75
- Details
- 14k White and Yellow Gold Ring
8 mm wide
2 Diamonds - .06 ctw
Clarity: VS2 - Color: F-G
Joseph Jewelry - Setting style
- Flush Set
- Band style
- Square Band
- Feature
- Diamonds
- Metal shown
- Two-Tone, White Gold, Yellow Gold
- Finish
- Polished
These specifications describe the original design. Stone counts and weights are approximate and may change with size or customization.
Customize
Use this design as a starting point for a custom piece.
Discuss the stones, metal, proportions, setting and finish with a designer, online or in our Seattle and Bellevue showrooms. You can bring reference photographs or your own stone for us to assess.
Design and estimate
The initial design and estimate are free, with no obligation. Your designer discusses the materials, changes and budget with you before you commit.
3D design review
After you accept the estimate and make a down payment, we create a 3D CAD model and rendered views. Revisions within the initial design parameters are included; changes to materials or their amounts are re-estimated.
Physical model
A full-size wax model can be made to review scale, shape and proportions before production. It can be viewed in a showroom or shipped to you.
Approval and production
The design is approved before production begins. Your designer confirms the schedule, and our jewelers make, set and finish the piece.
Quality
Our custom jewelry follows design and construction standards for metal thickness, weight, stone support and setting security.
- Structure and support
- The setting must have enough metal to support the stones and hold its shape through everyday wear. If an area needs more support, we address it before production.
- Diamond and gemstone selection
- We help you choose stones for your custom design, reviewing cut, color, clarity, consistency and fit. Your budget guides these choices; our standards for materials and craftsmanship remain the same.
- Final inspection
- Before completion, we review each custom piece for proportion, comfort, stone security and finish.
Lifetime warranty and care
- Lifetime warrantyYour custom piece is covered against manufacturing defects.
- Inspection every six monthsOur jewelers inspect your piece and provide ongoing care for the custom jewelry we make for you.
- Complimentary cleaningVisit us every six months for a complimentary cleaning.
Coverage conditions
For Joseph Jewelry custom pieces, coverage begins with your signature. To keep it active, Joseph Jewelry must inspect and sign for your piece every six months and perform recommended repairs and maintenance.
Repairs due to normal wear and tear are the owner's responsibility. Damage, abuse or alterations can void coverage. Customers outside Washington pay shipping both ways for inspections or repairs, plus applicable duty or customs fees.