Custom Marquise Diamond Engagement Ring
Item # 101227
Center stone sold separately.
Questions? Talk with a Joseph Jewelry designer
Matching items
Description
This stunning engagement ring features a marquise cut diamond prong set in the center of a three stone setting, with pear shaped diamonds on the sides. The split platinum shank is accented with bright cut set diamonds and milgrain beading. It was created for a couple from Seattle, WA, who worked with our designers both online and in person in our Bellevue, WA showroom to finalize the details of the piece. We created wedding band for them as well to match and complement this exquisite piece.
Read the full description
Three-stone Setting
The main diamond in this ring is just over two carats and marquise cut. It’s held securely in place by six platinum prongs, and the setting rises enough above the side stones to help emphasize the beauty of the center while still keeping it protected. Diamond Engagement Rings
On each side, a pear shaped diamond is prong set, which completes the three-stone setting and makes for a truly dazzling display, especially when the ring is viewed from the top. The pointed ends of the pear diamonds are oriented down the band as well, and this makes for a perfectly smooth transition into the criss-cross pattern of the split shank.
Diamond and Milgrain Accents
Round bright cut set diamonds run down the split shank shoulders from the spot where the center setting stops to just below the half-way mark on the band. These are framed with milgrain beading to give them a finished look and to add a bit of vintage flair to the piece.
Split Shank Design
The solid section forming the bottom of the band divides into two sections at about the three-quarter point. These two pieces then move away from each other before angling back in to meet just below the main setting. This creates a slit in the middle of the band that mirrors the shape of the marquis diamond at the top, and it also helps widen the band without making it bulky, helping to balance out the large stone at the top. Design Your Own Engagement Ring
Reference specifications
- Item number
- 101227
- US ring size shown
- 4.00
- Details
- Platinum Ring
2 Pear Diamonds - 1.48 ctw
18 Diamonds - .21 ctw
Clarity: VS2 - Color: F-G - Center pictured
- 2.06 ct Diamond
- Gem
- Diamond
- Shape
- Marquise
- Style
- Split Shank, Three Stone
- Setting style
- Bright Cut, Six Prong
- Band style
- Tapered
- Metal shown
- Platinum
- Finish
- Polished
These specifications describe the original design. Stone counts and weights are approximate and may change with size or customization.
Customize
Use this design as a starting point for a custom piece.
Discuss the stones, metal, proportions, setting and finish with a designer, online or in our Seattle and Bellevue showrooms. You can bring reference photographs or your own stone for us to assess.
Design and estimate
The initial design and estimate are free, with no obligation. Your designer discusses the materials, changes and budget with you before you commit.
3D design review
After you accept the estimate and make a down payment, we create a 3D CAD model and rendered views. Revisions within the initial design parameters are included; changes to materials or their amounts are re-estimated.
Physical model
A full-size wax model can be made to review scale, shape and proportions before production. It can be viewed in a showroom or shipped to you.
Approval and production
The design is approved before production begins. Your designer confirms the schedule, and our jewelers make, set and finish the piece.
Quality
Our custom jewelry follows design and construction standards for metal thickness, weight, stone support and setting security.
- Structure and support
- The setting must have enough metal to support the stones and hold its shape through everyday wear. If an area needs more support, we address it before production.
- Diamond and gemstone selection
- We help you choose stones for your custom design, reviewing cut, color, clarity, consistency and fit. Your budget guides these choices; our standards for materials and craftsmanship remain the same.
- Final inspection
- Before completion, we review each custom piece for proportion, comfort, stone security and finish.
Lifetime warranty and care
- Lifetime warrantyYour custom piece is covered against manufacturing defects.
- Inspection every six monthsOur jewelers inspect your piece and provide ongoing care for the custom jewelry we make for you.
- Complimentary cleaningVisit us every six months for a complimentary cleaning.
Coverage conditions
For Joseph Jewelry custom pieces, coverage begins with your signature. To keep it active, Joseph Jewelry must inspect and sign for your piece every six months and perform recommended repairs and maintenance.
Repairs due to normal wear and tear are the owner's responsibility. Damage, abuse or alterations can void coverage. Customers outside Washington pay shipping both ways for inspections or repairs, plus applicable duty or customs fees.