Custom Rose Gold and Princess Cut Diamond Engagement Ring
Item # 100657
Center stone sold separately.
Questions? Talk with a Joseph Jewelry designer
Description
This dazzling engagement ring features a princess cut diamond prong set in rose gold, with bright cut set diamond and milgrain accents lining the split shank. It was created for a client from Port Orchard, WA, and if you’d like to customize it to your own specifications, our team is ready to help. Design Your Own Engagement Ring
Read the full description
Center Setting
The main diamond in this ring is a 1.21 carat princess cut stone, and the rich glow of the 14k rose gold it’s set in provides a lovely contrast to the diamond’s stunning fire. The four prong setting lifts the stone up above the cathedral shank, cementing its central place in the design while still providing enough protection from the rigors of daily wear. Diamond Engagement Rings
Split Cathedral Shank
The shank itself begins as one piece, but even at the bottom, lines showing where the ultimate divisions will appear are present. The single piece of rose gold widens as it comes up the sides, and the full split occurs just past the mid-point on each side. From here, the two outer sections curve out slightly so that they can run uninterrupted along the sides of the center setting.
The middle piece then narrows a bit as it continues up to the top, joining the side of the main setting somewhat higher up than the two rails. The center setting itself rises up from a fourth section of the band, which splits off the cathedral shoulder from below about a quarter of the way down and runs directly below the center diamond parallel to the rails. Rose Gold Engagement Rings
Diamond and Milgrain Accents
All three sections of the split shank include round bright cut set diamond accents lined with milgrain, and these begin just below the main split at the mid-point on the band. The use of this type of setting and detailing brings a bit of classical flair to an otherwise contemporary design, and the round accent diamonds complement the squared center stone nicely.
Reference specifications
- Item number
- 100657
- US ring size shown
- 5.50
- Details
- 14k Rose Gold Ring
78 Diamonds
Clarity: VS2 - Color: F-G
Joseph Jewelry - Center pictured
- 1.21 ct Diamond
- Cut
- Princess Cut
- Gem
- Diamond
- Style
- Split Shank, Unique
- Setting style
- Bright Cut
- Band style
- Tapered
- Metal shown
- Rose Gold
- Finish
- Polished
These specifications describe the original design. Stone counts and weights are approximate and may change with size or customization.
Customize
Use this design as a starting point for a custom piece.
Discuss the stones, metal, proportions, setting and finish with a designer, online or in our Seattle and Bellevue showrooms. You can bring reference photographs or your own stone for us to assess.
Design and estimate
The initial design and estimate are free, with no obligation. Your designer discusses the materials, changes and budget with you before you commit.
3D design review
After you accept the estimate and make a down payment, we create a 3D CAD model and rendered views. Revisions within the initial design parameters are included; changes to materials or their amounts are re-estimated.
Physical model
A full-size wax model can be made to review scale, shape and proportions before production. It can be viewed in a showroom or shipped to you.
Approval and production
The design is approved before production begins. Your designer confirms the schedule, and our jewelers make, set and finish the piece.
Quality
Our custom jewelry follows design and construction standards for metal thickness, weight, stone support and setting security.
- Structure and support
- The setting must have enough metal to support the stones and hold its shape through everyday wear. If an area needs more support, we address it before production.
- Diamond and gemstone selection
- We help you choose stones for your custom design, reviewing cut, color, clarity, consistency and fit. Your budget guides these choices; our standards for materials and craftsmanship remain the same.
- Final inspection
- Before completion, we review each custom piece for proportion, comfort, stone security and finish.
Lifetime warranty and care
- Lifetime warrantyYour custom piece is covered against manufacturing defects.
- Inspection every six monthsOur jewelers inspect your piece and provide ongoing care for the custom jewelry we make for you.
- Complimentary cleaningVisit us every six months for a complimentary cleaning.
Coverage conditions
For Joseph Jewelry custom pieces, coverage begins with your signature. To keep it active, Joseph Jewelry must inspect and sign for your piece every six months and perform recommended repairs and maintenance.
Repairs due to normal wear and tear are the owner's responsibility. Damage, abuse or alterations can void coverage. Customers outside Washington pay shipping both ways for inspections or repairs, plus applicable duty or customs fees.